Mærker
 
Indkøbskurv
0 emner
 
Tilbud
 

Vindsensor

Vindsensor
Klik for at forstørre
Pris: 748,75 DKK
Tilgængelighed: Ikke på lager
Model: KE20-AS
Producent: KOCH Engineering
Gennemsnitlig vurdering: Ikke vurderet

KE20AS - Wind Sensor Electronic

Features:

·   Microprocessor based (can have new firmware loaded using on-board bootloader)

·   Two different wind different speed measurement methods and respective outputs

o Fast Wind Speed Measurement with digital output

§ Can (as an example)  be used for quick control of  Roller Shutter Systems

o Slow Wind Speed Measurement with analog output

§ Can (as an example)  be used to control regulations depending of a more precise measurement

·   3 status LED’s

o    Yellow       Wind Sensor (Anemometer) input pulse

o    Red            Fast Alarm Active

o    Green       Alive indicator

·   DIP-switch Programmable Alarm Threshold for the Fast Measurement Method Output

·   IHC ® compatible (Intelligent House Control by LK Denmark)

·   1 Analog DC output (0-10V) proportional to wind speed of 0-30 m/s

 

Vindsensor connector and DIP-switch

 

Wind Speed Measurement

Sensor input:                                                                1 Hz ~ 2.5 m/s wind speed

Accuracy                                                                     +/- 0.5 m/s         

Range                                                                           0.5 – 60 m/s

Analog Output                                                           0-10 V DC ~ 0-30 m/s wind speed

Sample Rate                                                                1 second

Fast Measurement Method                                       Moving Average of 10 samples

Slow Measurement Method                                      10 minutes Exponential Moving Average

 

DIP-Switch setting:

Wind Speed Alarm Threshold:                                   Programmable 1 to 15 m/s           (Fast Measurement Method)

                                                                                       In step of 1 m/s

 

Connections:

Terminal Block:

Pin 1                                                                               Voltage input (V IN 15-30V DC)

Pin 2                                                                               0V input (GND)

Pin 3                                                                               Alarm Output (open collector)

Pin 4                                                                               Analog Output

Pin 5                                                                               Wind Sensor Input (NO)

Pin 6                                                                               OV input (GND)

Wire size                                                                         AWG26 – AWG12

 

Serial DB9                                                                      Standard Serial Connection

General:

Supply Range:                                                             15 - 30 Volt DC (V IN)

Electrical Connection:                                                6 Pin Screw Terminal Block (detachable)

Data Connection:                                                      DB9 (DSUB) Serial

Data Speed                                                                 19.200 Baud, 8 Data bits. None Parity, 1 stop bit

Case Material                                                              Flame Retardant ABS

Box                                                                                 113 mm x 63 mm x 32.5 mm (Flammability rating: UL94V-0) Flanged for wall mount

Weight                                                                           ?

Accessories:

Wind Speed Anemometer:                                   KE30-A

Firmware Upload Program                                   freeware upload program

Skriv anmeldelse
Dit navn:


Din anmeldelse: Note: HTML er ikke oversat!

Vurdering: Dårlig            God

Indtast koden i boksen nedenfor:

Der er ingen ekstra billeder for dette produkt.